| |
|
|
| You are here:Measuring tools >> Caliper >> Special Purpose Caliper |
 |
| Special purpose Caliper ( 1 | 2 | 3 | 4 | 5 ) |
|
|
 |
|
| |
|
|
| ELECTRONIC ARC RADIUS CALIPER |
| |
| Code |
Range |
| 1189-150 |
3-150mm/0.12-6" |
| 1189-200 |
3-200mm/0.12-8" |
|
| |
| Measure the radius of arc less than half round |
| Resolution: 0.01mm/0.0005" |
| Buttons: zero, power on/off, inch/mm |
| Battery SR44, with one spare battery |
| Data output |
| Hardened stainless steel construction |
| Packed in plastic box or wooden box |
|
| |
| |
|
|
|
|
|
|
|
|
| |
| |
|
|
| ARC RADIUS VERNIER CALIPER |
| |
| Code |
Range |
| 1289-150 |
3-150mm/0.12-6" |
| 1289-200 |
3-200mm/0.12-8" |
|
| |
| Measure the radius of arc less than half round |
| Graduation: 0.05mm/1/128" |
| optional graduations: 0.02mm, 0.05mm, 0.02mm/0.001'' |
| Monoblock, made of hardened stainless steel, stain chrome plated reading surface |
| Packed in plastic box or wooden box |
| |
|
|
| |
| |
|
|
|
| |
| |
|
|
| ELECTRONIC GEAR TOOTH CALIPER |
| |
| Code |
Range |
| 1181-M30 |
M1-30mm/25-0.8TPI |
| 1181-M50 |
M5-50mm/5-0.5TPI |
|
| |
| Resolution: 0.01mm/0.0005" |
| The vertical scale measures the depth of teeth from the top to the pitch line |
| The horizontal scale measures the thickness of teeth in the pitch line |
| Carbide tips, with fine adjustment |
| Buttons: zero, power on/off, inch/mm |
| Battery SR44, with one spare battery, automatic power off |
| Data output |
| Hardened stainless steel construction |
| Packed in plastic box or wooden box |
| |
|
|
|
|
|
|
|
| |
| |
|
|
| ELECTRONIC V-ANVIL CALIPER |
| |
| Code |
Range |
Flutes |
| 1174 |
4-40mm/0.16-1.6" |
3 |
| 1173 |
1-40mm/0.04-1.6" |
5 |
|
| |
| Measure diameter of cylinder(such as taps, reamers and end mills) with odd number of flutes |
| Resolution: 0.01mm/0.0005" |
| Buttons: zero, power on/off, inch/mm |
| Supplied with calibration rod |
| Battery SR44, with one spare battery |
| Data output |
| Stainless steel construction |
| Packed in plastic box |
| |
|
|
|
|
|
|
| |
| |
|
|
| V-ANVIL VERNIER CALIPER |
| Code |
Range |
Flutes |
| 1273-40 |
1-40mm/0.04-1.6" |
5 |
| 1274-40 |
4-40mm/0.16-1.6" |
3 |
|
| Measure diameter of cylinder (such as taps, reamers and end mills ) wiyh odd number of flutes |
| Graduation: 0.05mm/1/128", optional graduations: 0.02mm, 0.05mm, 0.02mm/0.001'' |
| Made of hardened stainless steel, satin chrome plated reading surface |
| Packed in plastic box |
| |
|
|
|
|
|
|
|
